Ricoh FW830, Service Manual, Page: 102 / 227

3.1.2 Service Program Mode Table
1. In the Function column, comments are in italics.
2. In the data column, the default value is printed in bold letters.
3. A "#" after the mode number means that you only need to press the Copy
Exit Way key directly without pressing the Plus or Minus key to enter the
desired value or mode.
4. A "
°
" after the mode number means that the mode can be accessed by
Sales representatives.
The access procedure is as follows:
1) While simultaneously pressing the Plus, Minus and Clear/Stop keys,
turn on the main switch.
NOTE: The Call Service and Add Toner indicators will blink. This is to
confirm that the correct mode has been selected.
2) Follow the steps 3 to 5 of the SP mode access procedure.
3) To leave this mode, turn off the main switch.
Mode No.
Function Data
No. Leading
Margin
Indicator
Trailing
Margin
Indicator
1 00 01 Exposure Lamp OFF
When the main switch is turned off, this
mode is automatically selected to default.
(0: Normal)
0: Normal
1: Lamp OFF
Use this mode for removing the excess
toner from the development unit.
2 00 02 Misfeed Detection OFF
Copies are made without misfeed
detection.
When the main switch is turned off, this
mode is automatically returned to the
default. (0: Normal)
0: Normal
1: Misfeed
detection
OFF
Use this mode to check whether the paper
misfeed was caused by a sensor
malfunction.
SERVICE TOOLS 31 December 1992
4-16