![Ricoh FW830 Service Manual Download Page 130](http://html1.mh-extra.com/html/ricoh/fw830/fw830_service-manual_1456243130.webp)
Code
(DJ =)
Cause of Jam
SP Mode No
(Original Misfeed Counter)
22
Original is too small. (Minimum: B5 lengthwise)
SP43
(Upper transport section)
23
Original is pulled out from the rear original table
after the original registration sensor turns on but
before the original registration rollers start turning.
24
Original is under the original set sensor when the
original stopper solenoid turns on. (When the
original is fed from the front original table.)
25
Original is under the original entrance sensor
when the original stopper solenoid turns on.
(When the original is fed from the rear original
table.)
26
Original is pulled out from the front original table
after the registration sensor turns on but before
the original registration rollers start turning.
27
The 1st original transport sensor stays on when
the 2nd original transport sensor trailing edge
OFF check. (When the original is fed from the
front original table.)
28
The original registration sensor stays on when
the original exit sensor trailing edge OFF check.
(When the original is fed from the rear original
table.)
29
Original registration sensor ON check for the
switch back mode.
SP45
(Lower transport section)
30
Original entrance sensor ON check for the switch
back mode.
31
Switch back gate does not move to the up
position when the switch back gate solenoid turns
on.
SP47
(Recycle gate/switch back
gate)
32
2nd original transport sensor trailing edge OFF
check.
SP43
(Upper transport section)
33
1st original transport sensor leading/trailing edge
OFF check for repeat copy.
34
1st original transport sensor ON check for repeat
copy.
35
Original registration sensor trailing edge OFF
check.
SP45
(Lower transport section)
36
Original exit sensor ON check.
37
Original exit sensor leading/trailing edge OFF
check.
38
Original is too long. (Maximum: 3.6 meters)
SP44
(Turn section)
39
Recycle gate does not return to the original
position (up position) when the recycle gate
solenoid turns off.
SP47
(Recycle gate/switch back
gate)
31 December 1992
JAM CODE LIST
4-45
Summary of Contents for FW830
