Ricoh FW830, Service Manual

Page: 119 / 227

3.2.2 Input Check Mode Table
Input check No
Sensor/Switch/Signal
Status
No Leading
Margin
Indicator
Trailing
Margin
Indicator
Upper Exit
Indicator
Lower Exit
Indicator
0 00 00 Original Set Sensor Original detected Original not
detected
1 00 01 1st Original Transport
Sensor
2 00 02 2nd Original Transport
Sensor
3 00 03 Original Registration
Sensor
4 00 04 Original Exit Sensor
5 00 05 Original Entrance
Sensor
6 00 06 Recycle Gate Sensor Sensor not
actuated Sensor actuated
7 00 07 Switch Back Gate
Sensor
8 00 08 Paper Entrance Sensor
(Sheet Feeder) Paper detected Paper not
detected
9 00 09 1st Feed Sensor
10 01 00 2nd Feed Sensor
11 01 01 Registration sensor
12 01 02 Transport Sensor
13 01 03 Fusing Exit Sensor
14 01 04 Upper Exit Sensor
15 01 05 Lower Exit Sensor
16 01 06 Paper End Sensor
(Sheet Feeder) Paper detected Paper end
17 01 07 Sheet Feeder Set
Switch Sheet feeder set Sheet feeder not
set
18 01 08 Feed Pressure Switch
(Sheet Feeder) Feed pressure
lever position 3 Feed pressure
lever position
1 or 2
19 01 09 Leading Edge Sensor
(Roll Feeder) Paper detected Paper not
detected
20 02 00 Paper End Sensor
(Roll Feeder) Paper detected Paper end
21 02 01 Left Cutter Sensor
(Roll Feeder) Cutter detected Cutter not
detected
22 02 02 Right Cutter Sensor
(Roll Feeder)
23 02 03 Set Switch
(Roll Feeder) Roll feeder set Roll feeder not set
24 02 04 Door Safety Switch
(Roll Feeder) All roll feeder
doors closed One of the roll
feeder doors is
open
25 02 05 Rear Feeder Switch Rear original
table not set Rear original
table set
29 02 09 Stop Key Stop key is
pressed Stop key is not
pressed
SERVICE TOOLS 31 December 1992
4-34