7
7-12
Administering the E-820
Restart the E-820
Use the following procedure to restart the E-820, rather than using the power switch
on the back of the E-820.
T
O
RESTART
THE
E-820
1.
Make sure the E-820 is not receiving, processing, or printing a job.
Make sure the status message on the Control Panel reads Idle.
2.
Press the Menu button to display the Functions menu.
3.
Use the down arrow button to scroll to the last screen, and choose Shut Down.
4.
Use the line selection button to choose Restart Server.
Shutting down the E-820
You may need to shut down the E-820 for service. When you do so, fonts downloaded
to the hard disk are not deleted. Print jobs in the Hold and Printed queues and jobs
that have been processed but not printed are not deleted and are available for printing
when you restart the E-820.
T
O
SHUT
DOWN
THE
E-820
1.
Make sure the E-820 is not receiving, processing, or printing a job.
Make sure the status message on the Control Panel reads Idle. If a job has just finished
processing or printing, wait at least five seconds after the Control Panel status message
changes to Idle before proceeding.
N
OTE
:
If a job from the Print queue is processing, it will continue processing and print
after the E-820 is restarted; if a job to the Direct connection is processing, it will not
finish processing or printing.
2.
Press the Menu button to display the Functions menu.
