5
5-36
Setting up the E-820 from a Windows Computer
Outgoing Mail Server
—Specify the IP address of the server (SMTP) on your network
that handles outgoing e-mail.
N
OTE
:
You must define both an Incoming and Outgoing mail server. If an Outgoing
mail server is not defined, the e-mail service assumes that the incoming and outgoing
server names are the same.
Timeout (seconds)
—Specify the maximum amount of time that will elapse as the
E-820 attempts to connect to the mail server.
Polling Interval
—Specify how often the E-820 checks the mail server for relevant
e-mail.
Attachment Maximum Size
—Specify the maximum file size of a scan for the E-820 to
send as an attachment. If the scan file exceeds this maximum, the file is automatically
sent as a URL.
Mailbox Account Name
—Enter the mailbox name specified on the mail server.
This name tells the Fiery client mail service which account contains e-mail messages
for the E-820.
N
OTE
:
The account name entered in this field must first be specified on the mail server
by the administrator.
Fiery E-mail Address
—Enter the name of the e-mail account. For example,
.
Password
—Enter a password for accessing the mailbox account on the mail server.
Verify Password (remote Setup only)
—Reenter your password.
Administrator E-mail Address
—Enter the user name specified in E-820 setup.
The administrator authorizes a unique e-mail address to remotely administer e-mail
services. If an error occurs while you are executing a scan to e-mail, the e-mail service
sends an error message to the Administrator E-mail Address specified. The
administrator can authorize additional administrator e-mail addresses from this e-mail
address.
