Ricoh Fiery E-820 Configuration Manual Download

Page: 27 / 190

2-3

E-820 on a TCP/IP network with Windows NT 4.0/2000/XP

•

For Windows NT 4.0/2000/XP, install the appropriate printer driver files on the
Windows NT 4.0/2000 server.

For more information, see the

User Software Installation Guide

•

Repeat the installation for all users who print to the E-820.

Each server and workstation running the Fiery utilities with TCP/IP also needs the
TCP/IP protocol and the Fiery utility software.

Configuring a Windows NT 4.0/2000 server to communicate with
the E-820

To configure a Windows NT 4.0/2000 server to communicate with the E-820, follow
these general steps. More detail is provided in subsequent sections in this chapter and
in your Microsoft documentation.

• Load the TCP/IP network protocol on the server and configure it with an

IP address, subnet mask, and gateway.

• Enter the host name of the E-820 in the host database used by your system (see

page 2-4

• Perform E-820 Setup.

• On the Windows NT 4.0/2000 server, create a printer for each E-820 print

connection, install the appropriate printer drivers, and (optionally) share the printer
on the network (see

page 2-5

• Enter the host name and remote printer name of the E-820 in the printer

connection. For more information, see

page 2-18

• If the Windows NT 4.0/2000 server is also a workstation, install Fiery utilities (see

the

User Software Installation Guide

Summary of Contents for Fiery E-820































































































































































































Search results

Summary of Contents for Fiery E-820

Reviews:

Related manuals for Fiery E-820

Brands by name

Popular brands

Ricoh Fiery E-820, Configuration Manual

Search results

Summary of Contents for Fiery E-820

Reviews:

Related manuals for Fiery E-820

Brands by name

Popular brands