4
4-16
Performing Setup from the Control Panel
Port Setup options
Maximum Frame Size
(bytes)
4202/2154/1130/632 [4202]
Select the maximum frame size recommended by the network administrator at your
site. If you are uncertain of the setting to use, select the default value (4202).
Enable Source Routing
Yes/No [No]
Select Yes if your network supports source routing.
You cannot enable Ethernet and Token Ring simultaneously. To configure the
E-820, choose the port type you use and enter the settings for that port. Since
network setups are nested, the names of higher-level menus are shown in this
chapter to the left of each menu heading.
Network Setup
Port Setup
Ethernet Setup
Enable Ethernet
Yes/No [Yes]
Select Yes if you have Ethernet cabling connected to the E-820.
Ethernet Speed
Auto Detect/100 Mbps/10 Mbps [Auto Detect]
Select Auto Detect if your network environment is mixed or if you do not know the
network speed. If you know the speed of the network to which the E-820 is
attached (10 Mbps or 100 Mbps), select it.
Network Setup
Port Setup
Token Ring Setup
Enable Token Ring
Yes/No [No]
Select Yes if the E-820 is to be connected to a Token Ring network.
Token Ring Speed
Auto Detect/16 Mbps/4 Mbps [Auto Detect]
Select Auto Detect if your network environment is mixed, or select the speed
(4 Mbps or 16 Mbps) of the network to which the E-820 is attached.
Exit Port Setup
Ethernet Setup
Token Ring Setup
Port Setup
