5
5-13
Network Setup
The E-820 requires a unique, valid IP address. You can set a static address or specify
that the E-820 use DHCP, BOOTP, or RARP to obtain IP addresses automatically.
N
OTE
:
If you specify the DHCP, BOOTP, or RARP protocol, the E-820 reboots when
you save your changes and exit Setup. Allow the E-820 to reboot and return to Idle
before printing a Configuration page or proceeding with any other operations.
To set the subnet mask, enter one of the following values:
255.0.0.0
if the IP address starts with a number less than 128
255.255.0.0
if the IP address starts with a number from 128 through 191
255.255.255.0
if the IP address starts with a number greater than 191
N
OTE
:
Confirm the subnet mask setting with your network administrator before
proceeding. In some cases, the required setting may be different from those listed.
If your TCP/IP network has a gateway and users outside the gateway plan to print to
the E-820 using TCP/IP, enter the gateway address.
In remote Setup, the Token Ring information appears, even if you have not enabled
Token Ring on the E-820.
N
OTE
:
The E-820 stores assigned IP addresses, even if you later disable TCP/IP. If you
need to assign the E-820 IP address to another device, first set the E-820 address to a
null address.
