4
4-7
E-820 Control Panel
Shut Down
Shut down all E-820 activity in the correct manner and then restart. Use this
option instead of the power switch on the back of the E-820. The following
options are available from the submenu that appears:
Restart Server
—Restarts the server without shutting down the E-820 hard disk.
Shut Down System
—Shuts down the E-820 hard disk.
Reboot System
—Restarts the system after shutting down the E-820 hard disk.
Clear Server
Clear all jobs in all server queues, as well as all jobs archived on the E-820 hard disk,
the index of archived jobs (in the Archive window), all EFI Fiery FreeForm masters,
and the index of FreeForm masters (in the FreeForm window). Consult with your
administrator or operator before choosing Clear Server. If an Administrator password
has been set, you must enter it to access Clear Server.
Run Setup
Enter the Setup menu and change Setup option settings.
Run Diagnostics
This function is provided for service representatives only. For information about
running diagnostics, contact your authorized service/support technician.
Tray Alignment
Adjust the placement of text and images on a page so that they are correctly
aligned on the sheet of paper and both sides of a duplex sheet have the exact same
alignment. For more information on this function, see the
.
Calibration
Calibrate the E-820 using Fiery AutoCal
™
. For more information, see the
. If an Administrator password has been set, you must enter it to access
Calibration.
