Ricoh FAX4800L Operator'S Manual Download Page 331

Page: 331 / 334

Programming

Quick Dial

Speed Dial

Function 31 Yes.

Function 32 Yes.

Press the Quick Dial Key
that you wish to program.

Input the Speed Dial Code that you wish to program.

Enter the telephone number with the Ten key pad.

Press Yes.

Input a label using Quick Dial Key (or press No if you don’t want to).

Switch label insertion on or off using the arrow keys. Press Yes.

Press Function to finish.

Keystroke Program

1. Make sure that the machine is in Standby Mode.

2. Place a sheet of paper in the feeder.

3. Select all required features and telephone numbers as you would normally do.

4. Press the Quick Dial key that you wish to store the program in.

5. Press Yes.

Copying

1. Press Copy.

2. Place your original in the feeder.

3. Input the number of copies you need.

4. Press Start.

Changing Files From Memory

1. Memory Transmission Function 21 Yes.

Polling Reception

Function 22 Yes.

Polling Transmission

Function 23 Yes.

2. Input the file number.If you do not know the file number, print a list of files or press the

right arrow until the required file appears.

[Memory Transmission/Polling Reception]

3. Press Yes.

4. Press 1.

5. Press Yes.

6. Function.

[Polling Transmission]

3. Press YES twice.

4. Function.

✁

Summary of Contents for FAX4800L















































































































































































































































































































































Search results

Summary of Contents for FAX4800L

Reviews:

Related manuals for FAX4800L

Brands by name

Popular brands

Ricoh FAX4800L, Operator'S Manual

Search results

Summary of Contents for FAX4800L

Reviews:

Related manuals for FAX4800L

Brands by name

Popular brands