DMX CO2 Jet Instructions
Thank you for purchasing Salvin’s DMX CO2 Jet. When used within specifications, the DMX CO2 Jet
should add years of excitement to your productions, nightclub, or events.
The Salvin DMX CO2 Jet has two modes of operation:
DMX Mode
– Jet is activated by a DMX controller. Power is always supplied to the power cord.
LOCAL Mode
– Jet is activated when power is supplied to the power cord. Jet is deactivated when
power is no longer supplied to the power cord.
Configuring the DMX CO2 Jet for your desired mode of control
LOCAL Mode:
To use the DMX CO2 Jet in Local mode, all that you need to do is flip the rocker switch to
the LOCAL position (as shown in figure 1). Once the rocker switch is positioned in this mode, all other
configuration switches become irrelevant. The DMX CO2 Jet will now operate the same as all previous
generations of the Salvin CO2 Jet – Apply power to the power cord, the CO2 Jet is activated – The Jet is
deactivated when power is no longer supplied to the power cord.
Figure 1