5. Change the paper size plate (located at
the front of the feed unit).
To remove an existing plate, push in the
tab at the base while lifting the plate out
from above (see diagram). Insert a plate
with the appropriate paper size en-
graved on the front.
6. Fan the paper. Make sure the edges are
uniformly aligned and place the paper
into the feed unit with the side on wish
you wish to print face up. Check the pa-
per fits under the metal corners.
❐
Do not fill up the cassette past the
load limit marker.
7. If there is space between the paper and
fences, the paper will not be fed properly.
To avoid this, carefully move in each
fence until it is flush with the paper.
8. Replace the feed unit to its original posi-
tion.
LOO
K
ING
A
F
TER
THE
M
A
CHINE
LOOKING AFTER THE MACHINE
181
