User Parameter List
This shows the current settings of the User Parameters.
1. Press Function 6 0 2 2 2 2 6 and 3.
2.
and Start.
Quick Key Label List
Follow these steps to print out a label with the destination names/function names
currently stored in Quick Dials and User Function keys. Stick the label on the
operation panel for quick and easy reference.
1. Press
Function 3 1.
2.
and 2.
3. Start
❐
A protective transparent film is attached to the operation panel. Peel off the
film and stick the Quick Key Label on the operation panel.
❐
Cut out the Quick Key Label and glue it onto the operation panel. When you
stick it on, avoid covering the sensor near Quick Dial 49 (upper left corner).
NOTE: When replacing an old label with a new one, first remove all traces of the
old label. Sticking several labels on top of each other may cause the sen-
sor to malfunction.
Cross-references
Immediate Transmission: see page 14.
Quick Dial: see page 291.
Memory Transmission: see page 15.
Transfer Request: see page 51.
Confidential Transmission: see page 66.
Polling: see page 130.
Confidential Reception: see page 94.
Groups: see page 292.
Keystrokes: see page 61.
Speed Dial: see page 291.
Personal Codes: see page 75.
Authorized Reception: see page 104.
Forwarding: see page 108.
User Parameters: see page 227.
RE
P
O
R
T
S
REPORTS
USER-INITIATED REPORTS
175
