Ricoh Aficio SP C811DN Series, Software Manual

Page: 235 / 384

• The default is 300 seconds.
Specifying the number of concurrent connections
msh> diprint conn {multi | single}
• The above command specifies the number of concurrent diprint connections. Specify "multi" for
multiple connections or "single" for a single connection.
• The default is "multi".
Specifying the timeout and APL termination settings
msh> diprint apl {async | cync}
• Specifies whether or not to synchronize the timeout and APL termination.
dns
Use the "dns" command to configure or display DNS (Domain Name System) settings.
View settings
The following command displays current DNS settings:
msh> dns
IPv4 DNS server configuration
The following command enables or disables the IPv4 DNS server address:
msh> dns "number" server "server address"
The following command displays a configuration using the IP address 192.168.15.16 on a DNS 1
server:
msh> dns 1 server 192.168.15.16
• You can register IPv4 DNS Server address.
• You can register up to three IPv4 DNS server numbers.
• You cannot use "255.255.255.255" as the DNS server address.
IPv6 DNS server configuration
The following command enables or disables the IPv6 DNS server address:
msh> dns "number" server6 "server address"
• You can register IPv6 DNS Server address.
• You can register up to three IPv6 DNS server numbers.
Dynamic DNS function setting
msh> dns "interface_name" ddns {on|off}
• You can set the dynamic DNS function "active" or "inactive".
• {on} means "active" and {off} means "inactive".
Remote Maintenance by telnet
233
6