Ricoh Aficio SP 1200SF User Manual Download Page 23

Page: 23 / 196

Loading paper and documents

Note

• Put the paper into the manual feed slot

with the side to be printed face up.

• Make sure that the paper or print media

(see

Acceptable paper and other print

media

on page 16.) is straight and in the

correct position on the manual feed slot. If
it is not, the paper or the transparency
may not be fed correctly, resulting in a

skewed printout or a paper jam.

• Do not put more than one sheet of paper

in the manual feed slot at any one time, as
it may cause a jam.

• If you put any print media in the manual

feed slot before the machine is in the
Ready state, the print media may be
ejected without being printed on.

• To easily remove a small printout from the

output tray, lift up the scanner cover by
using both hands as shown in the
illustration.

• You can still use the machine while the

scanner cover is up. To close the scanner
cover, push it down with both hands.

Summary of Contents for Aficio SP 1200SF





































































































































































































Search results

Summary of Contents for Aficio SP 1200SF

Reviews:

Related manuals for Aficio SP 1200SF

Brands by name

Popular brands

Ricoh Aficio SP 1200SF, User Manual

Search results

Summary of Contents for Aficio SP 1200SF

Reviews:

Related manuals for Aficio SP 1200SF

Brands by name

Popular brands