Ricoh Aficio MP 161 Scanner Reference Download Page 9

Page: 9 / 128

About the Scanner Functions

This section describes functions you can use in the scanner mode.
For details about each function, see respective chapters.

❖

Sending scan files

There are several methods you can use to send captured data as files to com-
puters.
• Sending scan files by e-mail

For details, see chapter 1 "Sending Scan Files by E-mail"

• Sending scan files to a shared folder

For details, see chapter 2 "Sending Scan Files by Scan to Folder".

• Sending scan files to an FTP server

For details, see chapter 2 "Sending Scan Files by Scan to Folder".

• Sending scan files to a NetWare server

For details, see chapter 2 "Sending Scan Files by Scan to Folder".

• Delivering scan files using the delivery server

For details, see chapter 3 "Delivering Scan Files".

❖

Scanning originals using the TWAIN Driver

Use the TWAIN driver to specify the machine where originals will be scanned
from a client computer. For details, see chapter 4 "Using the Network TWAIN
Scanner Function".

Reference

p.9 “Sending Scan Files by E-mail”
p.39 “Sending Scan Files by Scan to Folder”
p.69 “Delivering Scan Files”
p.83 “Using the Network TWAIN Scanner Function”

Summary of Contents for Aficio MP 161

































































































































Search results

Summary of Contents for Aficio MP 161

Reviews:

Related manuals for Aficio MP 161

Brands by name

Popular brands

Ricoh Aficio MP 161, Scanner Reference

Search results

Summary of Contents for Aficio MP 161

Reviews:

Related manuals for Aficio MP 161

Brands by name

Popular brands