Ricoh Aficio MP 161 Scanner Reference Download Page 79

Page: 79 / 128

Basic Delivery Procedure

Basic Delivery Procedure

This section describes the basic operation for delivering scan files using the net-
work delivery scanner.

Important

❒

You must register destinations and senders in advance using the ScanRouter
delivery software installed on the delivery server.

Make sure that no previous settings remain.

If a previous setting remains, press the

{

Clear Modes

}

key.

If the E-mail or Scan to Folder screen is displayed, press

[

]

to switch

to the Network Delivery Scanner screen.

Place originals.

If necessary, select the original type.

For details, see "Selecting Original Type".

If necessary, specify the scanning density.

For details, see "Adjusting Image Density".

Select the destination.

You can specify multiple destinations.
For details, see “Specifying Delivery Destinations”.

If necessary, press

[

Options

]

to specify the resolution and the orientation of

the originals.

For details, see "Specifying Send Options".

Summary of Contents for Aficio MP 161

































































































































Search results

Summary of Contents for Aficio MP 161

Reviews:

Related manuals for Aficio MP 161

Brands by name

Popular brands

Ricoh Aficio MP 161, Scanner Reference

Search results

Summary of Contents for Aficio MP 161

Reviews:

Related manuals for Aficio MP 161

Brands by name

Popular brands