Basic Delivery Procedure
75
3
❒
To enable the Return Receipt function, it is necessary to make the settings
to send e-mail by SMTP with ScanRouter delivery software. For details
about how to specify this setting, see the manuals supplied with the Scan-
Router delivery software. Note, however, that if the receiving party's e-
mail application does not support Message Disposition Notification
(MDN), notification e-mail might not be returned.
❒
Register the sender’s e-mail address using the ScanRouter delivery soft-
ware in advance.
❒
If you press the
{
Check Destination
}
key, the initial scanner screen switches
to the Check Dest. screen. You can use the Check Dest. screen to check the
details of the selected destinations. For details, see "Check Destination".
❒
To cancel scanning, press the
{
Clear/ Stop
}
key.
Reference
p.104 “Selecting Original Type”
p.106 “Adjusting Image Density”
p.76 “Specifying Delivery Destinations”
p.21 “Manual Entry of an E-mail Address”
p.89 “Specifying Send Options”
p.27 “Specifying the Sender”
p.36 “Setting the Return Receipt Function”
p.37 “Specifying the Subject”
p.5 “Check Destination”
