Ricoh Aficio MP 161 Scanner Reference Download Page 52

Page: 52 / 128

Sending Scan Files by Scan to Folder

Press the

{

Start

}

key.

Scanning starts.
You must press the

{

}

key to send scan files that are scanned from the ex-

posure glass.
Scan files that are scanned from the ADF/ARDF are sent immediately.

If you still have originals to send, place them on the machine, and then
press the

{

Start

}

key.

Repeat this step until all originals are scanned.

After all originals are scanned, press the

{

}

key.

Transmission starts.

Note

❒

If you have selected two or more destinations, the destinations can be
made to appear one by one by pressing the

{U}

{T}

key.

❒

To cancel a selected destination, display the destination in the destination
field, and then press the

{

Clear/ Stop

}

key. To cancel a destination selected

from the address book, press the selected destination again.

❒

To cancel scanning, press the

{

Clear/ Stop

}

key.

Reference

p.104 “Selecting Original Type”
p.106 “Adjusting Image Density”
p.47 “Specifying Scan to Folder Destinations”
p.89 “Specifying Send Options”

Summary of Contents for Aficio MP 161

































































































































Search results

Summary of Contents for Aficio MP 161

Reviews:

Related manuals for Aficio MP 161

Brands by name

Popular brands

Ricoh Aficio MP 161, Scanner Reference

Search results

Summary of Contents for Aficio MP 161

Reviews:

Related manuals for Aficio MP 161

Brands by name

Popular brands