Ricoh Aficio MP 161 Scanner Reference Download Page 45

Page: 45 / 128

2. Sending Scan Files by Scan

to Folder

Using the Scan to Folder function, you can send scan files over the network to
shared folders, FTP server folders, or NetWare folders.

Before Sending Scan Files by Scan to
Folder

This section explains the necessary preparations and the procedure for sending
scan files by Scan to Folder.

Outline of Sending Scan Files by Scan to Folder

This section outlines the function for sending scan files by Scan to Folder.

Sending scan files to shared folders

This machine

You can send scan files to shared net-
work folders. To send scan files to shared
network folders, use the SMB protocol.

Computer with a shared folder

To use this function, it is necessary to cre-
ate a shared folder in advance. You can
specify a shared folder to save scan files.

Client computer

You can also browse scanned files saved
to a shared folder from a client computer.

ZZZ509S

Summary of Contents for Aficio MP 161

































































































































Search results

Summary of Contents for Aficio MP 161

Reviews:

Related manuals for Aficio MP 161

Brands by name

Popular brands

Ricoh Aficio MP 161, Scanner Reference

Search results

Summary of Contents for Aficio MP 161

Reviews:

Related manuals for Aficio MP 161

Brands by name

Popular brands