Ricoh Aficio IS 2425, Operating Instructions Manual

Page: 78 / 288

System Settings
70
2
To set authentication
This section describes how to specify authentication.
A
Press [
T
Next ] .
B
Press [ On ] or [ High Security ] under “Authentication”.
To make a search request to the LDAP server, use the administrator account
for authentication.
Authentication settings must comply with your server’s authentication set-
tings. Check your server settings before setting this machine.
[ High Security ] is available only with LDAP Version 3.0.
When
[ High Security ]
is selected, the administrator password is encrypted be-
fore it is sent to the network. When [ On ] is selected, the password is sent with-
out encryption.
To enter the user name and password
This section describes how to enter the user name and password.
A
Press [
T
Next ] .
B
Press
[ Change ]
under “User Name”.
When [ On ] or [ High Security ] is selected for the authentication setting, use the
administrator account name and password. Do not enter the administrator
account name and password when using authentication for each individual
or each search.
C
Enter the user name, and then press [ OK ] .
Procedures for the user name setting differ depending on server environ-
ment. Check your server environment before making the setting.
Example: Domain Name\User Name, User Name@Domain Name,
CN=Name, OU=Department Name, DC=Server Name
D
Press
[ Change ]
under “Password”.
E
Enter the password, and then press [ OK ] .
The user name and password are required for administrator authentication to
access the LDAP server.
You can set the user name and password in this machine’s Address Book to
allow individual authentication access to the LDAP server. Use Administra-
tor Tools to select the user name and password you want to use.