Ricoh Aficio GS 106, Operating Instructions Manual

Page: 43 / 160

Installing the Printer Driver
35
1
L
In the [ Printer URL ] box, enter “http://printer's address/printer” as the print-
er's address.
If the server authentication is issued, to enable SSL (a protocol for encrypted
communication), enter “https://printer's address/printer” (Internet Explor-
er 5.01, or a higher version must be installed).
(example IP address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter “http://printer's address/ipp” as the printer's address.
M
Enter a name for identifying the printer in
[ IPP Port Name ]
. Use a name dif-
ferent from the one of any existing port.
If a name is not specified here, the address entered in the
[ Printer URL ]
box be-
comes the IPP port name.
N
Click [ Detailed Settings ] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
O
Click [ OK ] .
P
Check that the port of the selected printer is displayed in [ Port: ] .
Q
Set a user code, if necessary.
Up to 8 numeric characters can be entered. No alphabetic characters or sym-
bols can be entered.
R
Select the [ Default Printer ] check box to configure the printer as default.
S
Click [ Continue ] .
Installation starts.
T
After the installation is completed, select one of the options to restart the
computer either now or later, and then click
[ Finish ] .
Restart the computer to complete installation.
Note
❒
To stop installation of the selected software, click [ Cancel ] before installa-
tion is complete.
❒
Auto Run may not work with certain operating system settings. In that
case, launch “Setup.exe” on the CD-ROM root directory.
❒
Setting a user code allows a SmartDeviceMonitor for Admin user to dis-
play and check the number of sheets each user prints. For details, see
SmartDeviceMonitor for Admin Help.