Ricoh AC104 Page 94 Service Documentation Download

Page: 94 / 160

PRINTING QUALITY PROBLEMS

B173 4-28 SM

4.6.10 GHOST (2)

Description

Ghost occurs at 75 mm intervals of the OPC drum in the whole
printing. (When printing on card stock or transparencies using
manual feeder)

Check and Cause

Solution

When printing on card stock thicker
than normal paper or transparencies
such as OHP, higher transfer voltage is
required.

Select “Thick Mode” on paper type
menu from the software application
and after use, we recommend
returning to the original Mode.

4.6.11 GHOST (3)

Description

White ghost occurs in the black image printing at 32 mm
intervals.

Check and Cause

Solution

The life of the developer may be
expired.

Problem in the toner cartridge, replace
the AIO and try to print again.

The abnormal voltage and bad contact
of the terminal of the supply roller

Check the approved voltage of the
supply roller and contact of the
terminal and adjust if necessary.

Digital Printer
Digital Printer
Digital Printer

B173T923.WMF

Digital Printer
Digital Printer
Digital Printer

B173T924.WMF

Summary of Contents for AC104

































































































































































Search results

Summary of Contents for AC104

Reviews:

Related manuals for AC104

Brands by name

Popular brands

Ricoh AC104, Service Documentation

Search results

Summary of Contents for AC104

Reviews:

Related manuals for AC104

Brands by name

Popular brands