Ricoh AC104, Service Documentation

Page: 120 / 160

TECH MODE
B173 5-4 SM
5.2.3 DATA SET-UP
SEND LEVEL
You can set the level of the transmission signal. The Tx level must be less than -12
dBm.
CAUTION: The send fax level is set at the factory. Do not change this in the field.
DIALING MODE
Select the dialing mode according to the user's line status.
• TONE: Electrical type of dial
•
PULSE: Mechanical type of dial
MODEM SPEED
You can set the maximum modem speed.
Communication is automatic when modem speed sets at lower speed. Keep the
default at 33.6 Kbps.
ERROR RATE
The baud rate automatically goes to 2400 bps when the error rate is not the same
as the set value. This keeps the error rate below the set value.
You can set the rate between 5% and 10%.
NOTIFY TONER
With this feature enabled, when the toner becomes low, the toner low information
will be sent to a specified contact point, for example, the service company. After
you access this menu, select ON, and when the LCD-prompts, enter the name and
the number of the contact point, the customer's fax number, the model name, and
the serial number.