Ricoh AC104, Service Documentation

Page: 37 / 160

GENERAL PRECAUTIONS ON DISASSEMBLY
SM 3-1 B173
Re
pla
ce
me
nt
and Adjus
tme
nt
3. REPLACEMENT AND ADJUSTMENT
3.1 GENERAL PRECAUTIONS ON DISASSEMBLY
Use caution when you disassemble and reassemble components. Make sure that
you put all cables in the correct position, after you replace a part.
You must do these before you service the machine:
1. Make sure that no documents are in the memory.
2. Disconnect the power cord.
3. Remove the toner and drum cartridges before you disassemble parts.
4. Use a flat and clean surface.
5. Replace only with necessary components.
6. Do not use high force when you push plastic-material components.
7. Make sure that all components are in their correct position.
Releasing Plastic Latches
Many parts set in their positions with plastic latches. The latches break easily.
Release them carefully. Push the hook end of the latch away from the part to which
it is latched to remove these parts.
B173R967.WMF