Ricoh 403079 - Aficio SP C410DN-KP Color Laser Printer, Hardware Manual

Page: 33 / 204

Attaching Memory Unit Type D 128MB, Memory Unit Type E 256MB (SDRAM Module)
21
2
L
Fasten the controller board to the printer using the three screws.
Note
❒
Be sure to return the provided screwdriver to its original position on the
inside of the front cover.
❒
After finishing the installation, you can check the memory unit is properly
installed: Print the configuration page from the
[ List/Test Print ] menu. If it is
installed properly, the memory capacity will appear under “Total Memo-
ry” on the configuration page.
❒
The table below shows the total SDRAM module capacities.
❒
If the memory unit is not properly installed, repeat this procedure. If you
cannot install it properly even after reinstallation, contact your sales or
service representative.
Reference
For printing the configuration page, see “Test Printing”, Quick Installation
Guide.
Install the controller board carefully. For details, see p.13 “Caution when
re-installing the controller board”.
Standard Extended Total
128 MB 128 MB 256 MB
128 MB 256 MB 384 MB
256 MB 128 MB 384 MB
256 MB 256 MB 512 MB
AQC720S