Ricoh 403079 - Aficio SP C410DN-KP Color Laser Printer Hardware Manual Download Page 152

Page: 152 / 204

Cleaning the Printer

140

Move the printer back to its original position. Lift the front of the tray, and
slide it carefully into the printer until it stops.

Do not slide the paper tray in with force. If you do, the front and side guides
might move.

Insert the plug of the power cord into the wall socket securely. Connect all
the interface cables that were removed.

Turn on the power switch.

Note

❒

Follow the same procedure to clean the paper feed roller of the optional Pa-
per Feed Unit.

AET045S

Summary of Contents for 403079 - Aficio SP C410DN-KP Color Laser Printer












































































































































































































Search results

Summary of Contents for 403079 - Aficio SP C410DN-KP Color Laser Printer

Reviews:

Related manuals for 403079 - Aficio SP C410DN-KP Color Laser Printer

Brands by name

Popular brands

Ricoh 403079 - Aficio SP C410DN-KP Color Laser Printer, Hardware Manual

Search results

Summary of Contents for 403079 - Aficio SP C410DN-KP Color Laser Printer

Reviews:

Related manuals for 403079 - Aficio SP C410DN-KP Color Laser Printer

Brands by name

Popular brands