9
Push-to-Open Installation — Gate in Closed position (Moving-Rod is retracted)
1.
Insert the M10 x 30 bolt through the center hole of the post bracket and post pivot bracket as shown. Place a
￠
10 washer ,
￠
10 lock washer and M10 nut on the bottom of the bolt and hand tighten.
2.
Attach the gate bracket and post bracket assembly to the opener by inserting a clevis pin. Secure the clevis
pins using the hairpin clips.
Summary of Contents for GTR062
Page 12: ...15 Connection of the control board...
Page 21: ......
