Richmond GTR062, User Manual

Page: 20 / 21

23
Both of the gates do
not move when
operating
OFF
Flash quickly for 3
seconds and then
back to flash
slowly(1 Blink every
second)
OFF
Voltage of the
battery is low, wait
the battery to be
charged.
Both of the gates do
not move when
operating Flash quickly for 3
seconds and then
back to OFF
Flash quickly for 3
seconds and then
back to flash
slowly(1 Blink every
second)
OFF
1. Ensure the
photo beam is not
blocked when a
photocell is used.
2. Check if the
photocell
is
defective or not.
Both of the gates do
not move when
operating
OFF
Flash quickly for 3
seconds and then
back to flash
slowly(1 Blink every
second)
Flash quickly for 3
seconds and then
back to OFF
Check if the
jumper wire
between the
EDGE and GND
terminal
is
loosening or not.
The gate stop when
on the way of
opening or closing Flash quickly for 10
seconds and then
back to OFF
Flash quickly for 10
seconds and then
back to flash
slowly(1 Blink every
second)
OFF
Two sequential
photo beam
blocked has been
detected. Please
ensure the photo
beam is not
blocked.
The gate stops during
opening or closing
OFF
Flash quickly for 10
seconds and then
back to flash
slowly(1 Blink every
second)
Flash quickly for 10
seconds and then
back to OFF
1. Two sequential
contact
entrapments have
been detected.
Please ensure
there is no obstacle
on the path of
opening or closing.
2. Increase the stall
force.
1. Re-power on the
Both of the gates do gate opener.
not move when Flash quickly Flash quickly Flash quickly 2. Replace the
operating control board as
necessary.