18
How to Program the Remote to the Opener
You must program the remote to the opener before operating. You can follow the below steps to program the
remote to the opener.
Press and release the
CODE SW
button, the
CODE
LED will be ON
,
then press the key in the remote twice in 4
seconds, the
CODE
LED will flash for 3 seconds and then to OFF. Now the remote has been programmed
successfully.
NOTE:
The button of the remote control should be pressed and hold for more than 2 seconds while
programming. Max. 10 remotes can be programmed for the opener. If you want program more remotes, you
should use an optional external receiver.
How to Erase All the Remote Codes
Press and hold the
CODE SW
button until the
CODE
LED from ON to OFF. Now all remote codes have been
erased.
Summary of Contents for GTR062
Page 12: ...15 Connection of the control board...
Page 21: ......
