Richmond GTR062, User Manual

Page: 19 / 21

22
Status of LED(s) & Trouble Shooting
Status of gate
opener
Status of LED(s)
Possible
Solution(s)
CODE LED POWER LED FULL LED
Standby OFF
Flash(1 Blink every
second)
OFF
Normal (Voltage of
the battery is
normal)
Running
Flash(1 Blink every
second ) Flash(1 Blink every
second) Flash(1 Blink every
second)
Normal
Standby OFF
Flash(1 Blink every
second)
Normal ON
Normal (Battery is
full)
Both of the gates do
not move when
operating
OFF
Flash quickly for 3
seconds and then
back to OFF
OFF
1. Check the
power supply of
the gate opener is
connected or not.
The batteries or a
24Vdc AC/DC
power supply must
be used to power
the gate opener.
2. Check the fuse.
3. Check if the wire
connection of the
power supply is
loosening or not.
Standby OFF
Flash(1 Blink every
2 seconds)
OFF
Voltage of the
battery is low, wait
the battery to be
charged.
The gate reverse
when on the way of
opening or closing
Flash(1 Blink every
second )
Flash quickly until
the gate stop
running
Flash(1 Blink every
second)
1. Ensure that the
gates swing freely
without
any
binding.
2. The stall force
is adjusted too
small. Turn the
Potentiometer E to
increase the force.
3.
Ensure the
photo beam is not
blocked when a
photocell is used.