Rich electric Invertek SuperCombi SC-1500-12X, User Manual

Page: 21 / 155

Rich Electric Co. “SuperCombi” User Manual V7.19 Copyright 2009
Page 21
1.3 Requirements
z
Screwdrivers for removing the lower-front panel and connecting AC loads.
z
2x battery cables (maximum length 6 meters) ensure battery cables are correctly sized.
z
Insulated box spanner (12 mm) for securing the DC terminal nuts.
z
Twin and Earth power cable for AC cabling.
1.4 Connection of Battery Cables
Ensure you have enough battery capacity to be able to operate your SuperCombi to its full
capacity.
Model
Item
SC-1500-12X SC-1500-24X SC-3000-12X SC-3000-24X
Minimum Battery
Capacity (Ah)
200Ah 100Ah 400Ah 200Ah
Recommended
Cable Size
53.5 mm
2
0 AWG
33.6 mm
2
2 AWG
85 mm
2
000 AWG
53.5 mm
2
0 AWG
NOTE: Consult your battery manufacturer for correct battery sizing for your application,
Battery cable sizes are based on recommended cable length of 2 meters. Longer cable lengths will
require large cable sizes.
Always use an insulated box spanner in order to avoid shorting the battery.
Never short the battery cables!
z
Remove the four screws at the lower-front panel of the enclosure and remove the panel.
z
Connect the battery cable: the + (red) on the right and the – (black) on the left.
z
Don’t reverse the (+) and (-) of the battery. This may cause internal damage.
z
Secure battery nuts tightly in order to reduce the contact resistance as much as possible.
For more information on battery bank enclosures and installations please refer to AUS/NZ standards
AS 2676, AS4509, AS3010 & AS4086.
For other regions, the installation and wiring should comply with relevant
National Standards and Practices.