Rice Lake Synergy 680HE, Technical Manual

Page: 32 / 78

680HE Synergy Indicator
26 Visit our website www.RiceLake.com
4.4.4 Setup – Communication Menu
Figure 4-8. Setup – Communication Menu
wlin
Linear Calibration – A linear or multi-point calibration is performed by entering up to four additional calibration
points; See Section 5.1.2 on page 41
WLINV# – Sets the test weight value for linear calibration point
WLINC# – Executes the linear calibration process for the point; generates the raw count value (F) for
the test weight value (V)
WLINF# – Displays the raw count value at the linear point weight; A linear calibration (WLINC#)
generates this raw count value; Manually changing this count value changes the linear point weight and
negates the linear calibration for the point
rezero
Rezero – Removes an offset value from the zero and span calibrations; See Section 5.2.3 on page 41
lstzro
Last Zero – Takes the last pushbutton zero in the system (from weigh mode) and uses it as the new zero
reference point, after which a new span calibration must be performed; This calibration cannot be performed
when calibrating a scale for the first time; See Section 5.2.1 on page 41
tmpzro
Temporary Zero – Temporarily zeros the displayed weight of a non-empty scale, after a span calibration was
performed; The difference between the temporary zero and the previously calibrated zero value is used as an
offset; See Section 5.2.2 on page 41
Menu Description
serial
Serial Port – Supports RS-232 and RS-485/422 serial communications; See Section 4.4.4.1 on page 27
usb
USB – Intended to be connected to a PC only; appears as a Virtual COM Port and is assigned a “COMx”
designation; applications communicate through the port like a standard RS-232 communications port;
See Section 4.4.4.2 on page 28
ethnet
Ethernet – Features Ethernet TCP/IP 10Base-T/100Base-TX communication and can support two simultaneous
connections, one as a server, the other as a client; See Section 4.4.4.3 on page 29
Table 4-7. Setup – Communication Menu Descriptions
Parameter Description
Table 4-6. Setup – Calibration Menu Parameter (Continued)
Setup
Comm
SERIAL USB ETHNET