Rice Lake Synergy 680HE, Technical Manual

Page: 28 / 78

680HE Synergy Indicator
22 Visit our website www.RiceLake.com
4.2 Main Menu
Figure 4-2. Main Menu
4.3 Audit Menu
Figure 4-3. Audit Menu
Menu Description
Audit
Audit – Displays the legally relevant firmware version and allows access to view/print audit trail information; See Section 4.3
Setup
Setup – Set configuration parameters for indicator (only accessible in setup mode); See Section 4.4 on page 23
Setpnt
Setpoints – Displays the setpoint value of configured setpoints; Read only unless access parameter for the setpoint is set to ON;
Setpoints are fully configurable in the setup menu while the indicator is in setup mode
Accum
Accumulator – Displays, prints and clears accumulated weight value; See Section 4.5 on page 39
Tare
Tare – Displays and clears stored tare value; See Section 4.6 on page 39
time
Time – Displays the time and allows the time to be edited (24-hour)
date
Date – Displays the date and allows the date to be edited
mac id
Mac ID – Displays the Mac ID (read only)
Vers
Version – Displays the installed firmware version number
Table 4-1. Main Menu Descriptions
Parameter Description
Lrv
LRV – Legally relevant firmware version
Calibr
Calibration – Displays total number of calibration events (read only)
Config
Configuration – Displays total number of configuration events (read only)
dest 1
Destination Port 1 – Audit trail port; Settings: RS2321 (default), RS2322,
RS485, TCPC, TCPS, USB, SRLCRD, NONE
dest 2
Destination Port 2 – Audit trail port; Settings: NONE (default), RS2321,
RS2322, RS485, TCPC, TCPS, USB, SRLCRD
dmpaud
Dump Audit Trail – Prints the audit parameters to the configured port
Table 4-2. Audit Menu Descriptions
Audit Setup Setpnt Accum Tare time date mac id Vers
Audit
LRV Calibr Config dest 1 dest 2 dmpaud