Configuration
© Rice Lake Weighing Systems
●
All Rights Reserved
31
4.4.5.1 Contact Information Menu
Figure 4-13. Contact Information Menu
date
Date – Allows setting of the date format and date separator character
DATFMT – Date Format;
Settings:
MMDDYY
(default), DDMMYY, YYMMDD, YYDDMM
DATSEP – Date Separator;
Settings:
SLASH
(default), DASH, SEMI, DOT
time
Time – Allows setting of the time format and the separator character
TIMFMT – Time Format;
Settings:
12HOUR
(default), 24HOUR
TIMSEP – Time Separator;
Settings:
COLON
(default), COMMA, DOT
keyhld
Key Hold – Allows setting of the key hold time and interval
HLDTIM – Key hold time (in tenths of a second); 20 equals 2 seconds;
Enter value: 10–50,
20
(default)
INTRVL – Key hold time interval; the amount of time between increments during a key hold (in twentieths of a second);
2 equals a tenth of a second (10 increments per second during a key hold);
Enter value: 1–100,
2
(default)
bright
Brightness – Specifies the brightness level of the display digits;
Settings:
LOW
(default), HIGH
color
Color – Specifies the color of the display digits;
Settings:
RED
(default), GREEN
locale
Location Gravity Compensation – Enables gravity compensation;
Settings:
OFF
(default) – gravity compensation disabled
ON – calculates gravity compensation using the origin and destination latitudes and elevations
FACTOR – uses origin and destination gravity factors to find gravity compensation
latorg
Latitude of Origin – Original latitude (to nearest degree) for gravity compensation; displays when LOCALE parameter is set to
ON;
Enter value: 0–90,
45
(default)
eleorg
Elevation of Origin – Original elevation (in meters) for gravity compensation; displays when LOCALE parameter is set to ON;
Enter value: -9999–9999,
345
(default)
latdst
Latitude of Destination – Destination latitude (to nearest degree) for gravity compensation; displays when LOCALE parameter
is set to ON;
Enter value: 0–90,
45
(default)
eledst
Elevation of Destination – Destination elevation (in meters) for gravity compensation; displays when LOCALE parameter is set
to ON;
Enter value: -9999–9999,
345
(default)
grvorg
Gravity of Origin – Original gravity factor (in m/s
2
) for gravity compensation; displays when LOCALE parameter is set to
FACTOR;
Enter value: 9.00000–9.99999,
9.80665
(default)
grvdst
Gravity of Destination – Destination gravity factor (in m/s
2
) for gravity compensation; displays when LOCALE parameter is set
to FACTOR
; Enter value: 9.00000–9.99999,
9.80665
(default)
Parameter
Description
compny
Company – Contact company name;
Enter characters: Alphanumeric entry up to 30 characters
addr 1-3
Address – Contact company address lines;
Enter characters: Alphanumeric entry up to 20 characters (for each line)
name 1-3
Name – Contact names;
Enter characters: Alphanumeric entry up to 30 characters (for each line)
phone1-3
Phone – Contact phone numbers;
Enter characters: Alphanumeric entry up to 20 characters (for each line)
Email – Contact email address;
Enter characters: Alphanumeric entry up to 40 characters
lstcal
Last Cal – Last calibration date;
Enter value: 8-digit number (MMDDYYYY)
nxtcal
Next Cal – Next calibration date;
Enter value: 8-digit number (MMDDYYYY)
Table 4-12. Contact Information Menu Parameters
Parameter
Description
Table 4-11. Setup – Program Menu Parameters (Continued)
Setup
Progrm
contct
Compny
addr 1
addr 2
phone1
phone2
phone3
addr 3
name 1
lstcal
name 2
name 3
nxtcal
Summary of Contents for Synergy 680HE
Page 77: ......
