RHINO RD160 E3, Operator'S Manual

Page: 76 / 85

76
Rhino RD160 E3/E4
MAINTENANCE
MAINTENANCE TABLE
INTERVAL MAINTENANCE AREA THINGS TO CHECK
Main & Side Broom Inspect brooms for wear and damage, remove strings and debris from bristles and drive assembly if found.
Air intake system Empty & clean dust cup of pre-cleaner, Check the air filter clog indicator.
Coolant system Check coolant level and top up as needed.
Engine Refer Kubota engine owner's manual, Check water seperator visually.
Brake Check brake oil level and top up as needed.
Inspect the hopper aprons for wear or damage and replace as needed.
Shake and clean hopper dust filters, replace as needed.
Hydraulic system Check hydraulic oil level and top up as needed.
Wheels and res Visually inspect for defla on, wear and damage. Repair or replace as needed.
Miscellaneous Check belts for wear, Check the hydraulic hoses and fi ngs visually for any leaks or damage.
Rotate end-to-end.
Inspect broom chamber seals and aprons for wear and damage, adjust or replace as needed.
Perform main broom adjustment test and adjust as needed.
Check func oning of direc onal control pedal and adjust as needed.
Blow out hydraulic oil cooler fins with compressed air. (If so equipped)
Wheels and res Check and ghten front & rear wheel nuts to 200 Nm torque. (For the first me only).
Engine Refer Kubota engine owner's manual.
Coolant system Inspect radiator fins and clean as needed.
Check func oning of direc onal control pedal and adjust if needed.
Check oil level and top up as needed.
Blow out hydraulic oil cooler fins with compressed air. (If so equipped)
Inspect hopper side structure and door seals for wear or damage. Adjust or replace as needed.
Inspect filter frame seals for damages. Adjust or replace as needed.
100 Hours
Hopper
Daily
Hopper
50 Hours
Main Broom
Hydraulic system
Hydraulic system