RHINO RD160 E3, Operator'S Manual

Page: 52 / 85

52
Rhino RD160 E3/E4
MACHINE OPERATION
When approaching downgrades, select the proper speed and use the brakes
as required to maintain safe descent speed without over-speeding the
engine or gaining excess travel speed.
STARTING THE MACHINE
Before star ng the machine:
WARNING:
û
Do not smoke while refueling or topping up fluids.
û
Do not refuel or top up near open flames/fire.
û
Do not refuel or top up near a hot surface.
WARNING:
Do not let fuel or
oil to leak into the
environment. Risk
of contamina on!
If applicable use the above safety devices:
1. Safety Eyewear
2. Safety Helmet
3. Earmuff
4. Safety Reflec ng Jacket/Overalls
5. Safety Shoes
6. Safety Gloves
7. Dust Mask
1. Sit in operator seat, adjust seat posi on (if required) ensure parking brake
is applied, check if the direc on control pedal is in neutral posi on.
2. Thro le should be in idle posi on.
3. Turn the igni on key to GL posi on to ini ate engine pre-hea ng, wait ll
the glow plug lamp goes off, then con nue star ng the engine.
DRIVING THE MACHINE
GL
ON
OFF
NOTE: If the engine does not start after 10 seconds,
release key, wait for 1 minute and repeat the procedure
again.
WARNING: This machine emits toxic gases.
Severe respiratory damage can be caused.
Provide sufficient ventilation.
Idle engine speed
Star ng:
Avoid sta c electricity when
fueling. Avoid death or
serious injury from fire or
explosion.