RHINO RD160 E3, Operator'S Manual

Page: 38 / 85

38
Rhino RD160 E3/E4
The direc onal pedal controls direc on of travel and the propelling speed of
the machine. You change the speed of the machine with the pressure of your
foot; the harder you press the faster the machine travels.
11. Direc on Control Pedal:
Forward: Gently press the top of the direc onal
pedal with the toe of your foot.
Reverse: Press the bo om of the direc onal
pedal with the heel of your foot.
Note: It is normal by design to see the machine
achieve lower speed during reversing than
forward.
Neutral: Take your foot off the direc onal pedal
and it will return to the neutral posi on.
The brake pedal is used to slow or stop the machine.
The brakes are located at the front wheels of the machine.
12. Brake Pedal:
To Stop: Take your foot off the direc onal
control pedal and let it return to the neutral
posi on. Step on the brake pedal.
Note: For normal slowing down of the machine or coming to a stop gently,
there is no need to use the brake pedal. Only in case of emergency or during
climbing up or down a gradient (ramps, etc.) pressing the brake pedal may be
required.
CONTROLS