RHINO RD160 E3, Operator'S Manual

Page: 77 / 85

77
Rhino RD160 E3/E4
MAINTENANCE
INTERVAL MAINTENANCE AREA THINGS TO CHECK
Engine Refer Kubota engine owner's manual.
Clean air filter. NOTE: Clean more o en in dusty condi ons.
Replace air filter.
Ba ery Check water level, clean and ghten ba ery cable connec on.
Steering Cylinder (2 fi ngs) Lubrica on type - grease
Door Cylinder (2 fi ngs) Lubrica on type – grease
Hood Latches & Hinges - Lubrica on type - oil
Miscellaneous
Check an -sta c drag chain on main broom counter weight for damage or excessive wear. Make sure the chain is
touching the ground at all mes.
Engine Refer Kubota engine owner's manual.
Brake cylinder Check brake oil line, oil level and top up if needed.
Coolant system Drain and flush the coolant system and top up as needed.
Side broom Check side broom li cable, replace if needed.
Clean hydraulic oil strainer and breather cap.
Replace hydraulic oil and filter.
Check & ghten front and rear wheel nuts. (Torque to 200 Nm)
Check & ghten wheel motor nuts. (Torque to 640 Nm)
800 Hours
Wheels and res
400 Hours
500 Hours
200 Hours
Hydraulic system
Air intake system
Lubrica on points