RHINO RD160 E3, Operator'S Manual

Page: 40 / 85

40
Rhino RD160 E3/E4
The headlamp switch is used to ac vate the headlamps and the taillamps of
the machine.
The warning beacon lamp switch is used to ac vate the warning beacon
lamps (if equipped) which are used to warn others that the machine is in
opera on.
15. Headlamp Switch:
16. Warning Beacon Lamp Switch (if equipped):
The igni on key switch starts and stops the machine’s engine.
It is located at the right hand side of the steering wheel in the operator’s
console.
17. Igni on Key Switch for Engine Start/Stop:
GL
ON
OFF
OFF - Engine & Electrical’s are in Off condi on.
ON - Electrical systems are powered up.
PRE-HEAT (GL) - Engine pre-hea ng begins.
START - Engine starts. Release the key as soon as the engine starts.
Preheat (GL): Turn the key clockwise. The glow plug light will come on. Hold
the key in this posi on for 15 to 30 seconds ( ll the light goes off), depending
on weather condi ons. Colder weather requires longer me.
CONTROLS