RHINO RD160 E3, Operator'S Manual

Page: 65 / 85

65
Rhino RD160 E3/E4
MAINTENANCE
PREVENTIVE MAINTENANCE
Preventive Maintenance Instructions
LUBRICATION
Engine:
Kindly refer the Kubota Diesel Engine Operator’s Manual supplied along with
this machine for service and maintenance of the engine.
Rear Wheel Actuator
The rear wheel actuator pivots the rear wheel. The actuator has a grease
fitting to lubricate the bearings.
HYDRAULICS
Hydraulic Oil Tank
The hydraulic oil tank is located below the operator seat.
The hydraulic pump is located in the engine bay attached to the engine.
The hydraulic oil tank has a cap with a breather assembly.
Check the hydraulic oil level at operating temperature every 100 hours of
operation.
Ensure that the hopper is in completely lowered position.
The sight gauge is marked with FULL (black line) and ADD (red line) levels to
indicate the level of hydraulic oil in the tank.
WARNING:
Do not overfill the hydraulic oil.
Do not operate machine with low level of hydraulic oil. Damage to
the system may occur.