RHINO RD160 E3, Operator'S Manual

Page: 69 / 85

69
Rhino RD160 E3/E4
MAINTENANCE
Width
Main broom pattern checking and adjusting
1. Apply white chalk on to a smooth surface.
2. Raise the side broom and main broom and position the main broom over
the chalked surface.
3. Apply parking brake.
4. Start the main broom.
5. Lower the main broom for 15 seconds.
6. Raise the main broom
7. Stop the main broom.
8. Move machine out of the test area.
9. Check the width of the pattern. A proper broom pattern will have a width
of 50 mm (2 inches).
NOTE: Use only brooms recommended by the manufacturer.
Side Broom
The side broom sweeps debris from the edges/corners to the path of the
main broom.
Check the side broom everyday for wear or damage.
Remove any ropes, strings or wires found in the side broom or its drive hub.
Check the pattern of the RIGHT side broom everyday. It should be at 10
o’clock to 3 o’clock position when the broom rotates.
Check the pattern of the LEFT side broom everyday. It should be at 9 o’clock
to 2 o’clock position when the broom rotates.
Replace worn out or damaged broom when it can no longer perform.
Right Side Broom
Le Side Broom