Providing power to the machine:
u
Power cord shall be certified for the country
where the machine will be installed.
Plug
one end of the power cord into the power cord
receptacle on the back of the machine. The
other end goes into the wall outlet.
!
DANGER
Hazardous voltage.
Use only approved
power cord
assemblies.
Locate a clear work area 48” wide X 30” deep with a duplex outlet within
5 feet that provides a 15-amp service (16-amp European). The work area
must be a solid and firm cabinet or a heavy duty table with a flat level
surface.
Locate your punch on the right side of a 48” wide work area with the chip
tray near the front edge of the work area.
Never attempt to move the HD punch with one person!
Always move your HD punch with two people, one on each side.
Placing the APES System in the proper location:
6500/7000
7700
6
