Ready to Operate the APES System.
Now that you have setup both the APES System Reception and Ejector you're ready to begin a
job.
Place your job on top of the Ejector just behind the punching location. Locate the edge to be
punched toward the front of the machine and face up. Position your Foot Pedal in a comfortable
location.
Begin loading the APES System Ejector by picking 20-25 sheets and setting them in the APES
System Ejector, and jogging the pages down and right against the Paper Stop(s). As you actuate
the foot pedal begin reaching for another 20-25 sheets to feed into the Ejector. Repeat.
You will find the APES System has increased your productivity by doing the take-away and
stacking of your job for you.
21
Figure AA
Optional Mounting of Palm Switch Bracket:
Attach palm switch bracket by loosening the bolt shown in figure Z1 and slipping the bracket
between the plate and the washer, tighten the bolt. Attach palm switch (figure Z2) from HD7700 or
purchased separately. Plug palm switch into accessory outlet (figure Z3) on right side of APES
ejector. Select Paper Stop Active on the control panel (See page 16).
Figure Z1
Figure Z2
Figure Z3
