Place the APES System Ejector Base Plate Assembly on top of the punch. Avoid colliding the
APES System
and the
Assembly with the punch while setting it
down. Keep control cable clear. See Figure G.
Front Paper Guides
Drive Motor
Adjust the APES System Ejector Base Plate Assembly back against the front of the punch and
install and tighten the two 3-winged
provided. See Figure G.
mounting knobs
Preparing your HD7700 for the APES System:
Unplug HD7700 from outlet! DO NOT OPEN COVER!! Hazardous voltage inside! Crush
hazard! Keep hands away from moving parts!
Unplug foot pedal and store (the APES System has a foot pedal attached). See Figure H. If the
palm switch is being used; unplug palm switch and remove palm switch from machine.
See Figure H Remove Knob (1) by rotating counter-clockwise; remove Paper Pointer Guide (2).
Store these Items, they will not be needed while the APES System is installed.
7700
10
Figure G
