Mount the Reception Paper Guide to the APES System Reception top with the 2 supplied 3-
winged knobs. Push the assembly to its back-most setting. This is the standard location for the
Paper Guide. The Paper Stop adjustment is covered later in this manual. See Figure R.
Plugging in the APES System for the first time:
See Figure S. Attach the Reception cable to the back of the punch. Attach the APES System
Ejector Control Cable from the Ejector Top Plate Assembly to the back of the Reception Assembly
by inserting the keyed connector and tightening the collar. Attach the power cord for the punch
and the APES System to the power cord receptacles on the back side of each device and plug
each cord into a protected AC outlet as outlined earlier in the Safe Operating Guidelines section.
6500/7000
7700
15
Figure R
Figure S
