Table of Contents
Topic:
Page Number:
Important safety notice!
4
Placing the APES System in the proper location.
6
Preparing your HD7000 or HD6500 for the APES System.
7
Mounting the APES System to a punch.
8
Preparing your HD7700 for the APES System.
10
Mounting the APES System to a HD7700 punch.
12
Mounting continued for all setups.
13
Plugging in the APES System for the first time.
15
Operating the APES System.
1. Control Center and Power Overview.
16
2. Reception Setup.
17
3. Accessing the Die with an HD7000.
17
4. Ejector Setup 6” and larger paper.
18
5. Ejector Setup 5-1/2” and smaller paper.
20
6. Ready to Operate.
21
Setup and Use of the AccuSet Index Paper Guide.
22
Troubleshooting Guide.
23
Electrical Diagram for APES System 115VAC
24
Electrical Diagram for APES System 230VAC
25
NOTICE: This manual covers both the APES System for the HD7000 and HD6500 Punches and also the
APES System for the HD7700 Punch. The following symbols will head sections related to those machines.
You may skip ahead to the next section if your machine is not designated within the
heading of the section. In most cases both designators will appear.
= APES System and the HD7700 Punch.
= APES System and the HD7000 or HD6500 Punch.
6500/7000
7700
3
