Operating the APES System.
Control Center and Power Overview;
APES-14 Paper Exit INACTIVE – Switching to this position puts the
APES-14 in idle status. Your punch will still operate normally but the
APES-14 will not eject and stack.
Normal setting for this switch is down.
APES-14 Paper Exit ACTIVE – Puts the APES-14 in the active status.
Your punch and APES-14 will work together punching, ejecting, and
stacking.
Paper Stop ACTIVE – When selected, the optional Paper Stop will
override the foot pedal. When correctly installed the paper will activate the
switch, cycling the machine in the same manner as the foot pedal. (See
assembly instructions within the Paper Stop package)
Normal setting for this switch is down.
Foot Pedal ACTIVE – When selected, it allows for normal activation with
the attached foot pedal. The optional Paper Stop Switch can be installed
without removing the foot pedal. Only one is active at a time.
Portrait – Changes APES-14 machine timing to better accommodate
stacking portrait paper.
Landscape – Changes APES-14 machine timing to better accommodate
stacking landscape paper.
Normal setting for this switch is down.
APES-14 POWER ON I/0 – Turns the APES-14 off. It is recommended you
turn the APES-14 off when you're done for the day. The punch has its own
independent power switch that should be powered off also.
6500/7000
7700
16
