Example spaced U-Bolt locations.
All other U-Bolts to be fixed
Nuts/washers below the
bracket only for fixed joint.
Nuts/washers both sides of the bracket for
sliding joint.
Gap 3mm min.
5mm max
All the brackets on the burner tube, except,
the bracket adjacent to the U-Bend end,
should have spaced U-Bolts. All middle
brackets on the fan tube should have nuts
and washers on both sides of the bracket.
This is to allow the U-Bolt to be tightened
whilst still allowing a 3mm gap for the
tube to expand.
Slide the bracket assemblies along the tubes
to the correct position, in the correct order
(15-25kW models have a different first
bracket). Refer to detailed assembly draw-
ing (Figure 41 to Figure 50) for more details.
Note:
Do not tighten any of the nuts at this stage.
Models 15-25kW burner bracket and
models 30-50kW all brackets - M8
U-Bolt. Models 15-25kW remaining
brackets all M6 U-Bolts.
Example spaced U-Bolt locations.
All end U-Bolts to be fixed
Figure 26.3
U-Bolt to U-Tube heater suspension brackets
Figure 26.4
U-Bolt to U-Tube heater suspension brackets
Figure 26.5
U-Bolt to U-Tube heater suspension brackets
Fixed U-Bolt detail. Nut
and washers on bottom
of bracket.
Attach U-Bolts to the linear heater suspension
brackets.
Note:
U-Bolts, washers and nuts are stainless steel. All
other fixings are BZP.
Note that the 15-25kW linear heaters have
two types of U-Bolt, 30-50kW linear heaters
have one type of U-Bolt.
The bracket furthest from the burner must
be installed with the flange and reflector
fixing tabs facing away from the burner end
of the heater. All other brackets must have
the flanges facing towards the burner end.
Bracket furthest from burner has flange
facing away from burner end.
Looking
from above
the heater
Burner End
Bracket furthest from burner has flange
facing away from burner end.
Burner end bracket and all intermediate brackets
have flange facing towards burner end.
Spaced U-Bolt detail.
Nuts and washers both sides of bracket.
Fit nuts and washers to the U-Bolts and
loosely secure to the bracket.
All middle brackets should have the spaced
U-Bolt detail.
27
Summary of Contents for VS15LHE8
