Reznor VS15LHE8, Installation & Operating Manual

Page: 4 / 60

Welcome
Welcome to the new range of high efficiency
Vision radiant tube heaters. Local regula-
tions may vary in the country of use and it
is the installers responsibility to ensure that
such regulations are satisfied.
All installation, assembly, commissioning
and service procedures must be carried out
by suitable qualified competent persons
to the statutory regulations in the country
of use.
When assembling, installing, commission-
ing and servicing is undertaken on radiant
tube heaters specified in these instruc-
tions, due care and attention is required to
ensure that working at height regulations
are adhered to at the mounting heights
specified.
All Dimensions shown are in mm unless
stated otherwise.
PLEASE READ:
Read this document prior to installation to
familiarise yourself with the components
and tools you require at the various stages
of assembly.
The manufacturer reserves the right to alter
specifications without prior notice.
1. Installation requirements
1.1 Health and Safety
The Vision VS Radiant Tube Heater detailed
herewith is manufactured within a strictly
controlled quality environment within the
parameters of ISO 9001.
These instructions are only valid for appli-
ances designed to operate in Europe. If the
country code and gas category on the appli-
ance data label does not match the country
of installation or the country codes and
gas category’s as shown in this instruction
manual, it will be necessary to contact the
distributor or manufacturer to provide the
necessary information for the modification
of the appliance to the conditions of use for
the country of installation.
The Vision VS Radiant Tube Heater has
been tested and assessed for compliance
with the following European Directives.
• Gas Appliances Regulations (EU) 2016/426
• Eco-Design Directive (2009/125/EC)
• Machinery Directive: (2006/42/EC)
• Low Voltage Directive: (2014/35/EU)
• Electromagnetic Compatibility Directive:
(2014/30/EU)
• Product Liability Directive: (85/374/EEC)
The manufacturer has taken reasonable and
practical steps to ensure that the Vision
Radiant Tube Heater is safe and without
risk when properly used.
These heaters should therefore only be used
in the manner and purpose for which they
were intended and in accordance with the
recommendations detailed herewith.
The heaters have been designed, manufac-
tured, assembled, inspected, and strictly
tested with safety and quality in mind.
There are certain basic precautions which
the installer and user should be aware of,
and they are strongly advised to read the
appropriate sections of the information
pack accompanying the heater, prior to
installation or use.
The Manufacturer supports all new prod-
ucts being supplied to their customers with
a comprehensive information pack; this
clearly defines mandatory instructions for
the safe installation, use, and maintenance,
of the appliance(s).
Where proprietary items are incorporated
into Vision Radiant Tube Heaters, detailed
information and instructions are provided
as part of the information pack.
It is the responsibility of the installer, owner,
user, or hirer, of the Vision Radiant Tube
Heater, to ensure that they are familiar
with the appropriate information/manuals,
supplied by the manufacturer, and that
they are suitably aware of the purpose of
the manuals and the safety instructions. In
addition, operators must be suitably trained
in the use of the appliance so as to ensure
its continued safe and efficient use.
The manufacturer has a commitment to
continuous improvement and therefore
reserves the right to amend or change the
specification of the vision radiant tube range
subject to compliance with the appropriate
European, national, and local regulations.
Contained within the text of the manual,
the words ‘Caution’ and ‘Warning’ are used
to highlight certain points.
CAUTION
Caution is used when failure to follow
or implement the instruction(s) can lead
to premature failure or damage to the
heater or its component parts.
WARNING
Warning is used when failure to heed or
implement said instruction(s) can lead to
not only component damage, but also to
hazardous situations developing, where
personal injury is at risk.
The Vision VS Radiant Tube Heater conforms to
the following standards:
EN 416-1
Single burner gas-fired overhead radiant
tube heaters for non-domestic use. Safety.
EN 416-2
Single burner gas-fired overhead radiant
tube heaters for non-domestic use. Rational
use of energy.
EN 777-1
Multi-burner gas fired overhead radiant
tube heater systems for non-domestic use.
System D – Safety
EN 60335-1
Safety of Household and Similar Electrical
Appliances General Requirements.
EN 60335-2-102
Household and similar electrical appli-
ances. Safety. Particular requirements for
gas, oil and solid-fuel burning appliances
having electrical connections.
EN 55014-1
Electromagnetic compatibility. Require-
ments for household appliances, electric
tools and similar apparatus. Emission.
EN 55014-2
Electromagnetic compatibility. Require-
ments for household appliances, electric
tools and similar apparatus. Immunity.
Note: Neither asbestos nor soft soldered joints are
used in the construction or manufacture of the Vision
Radiant Tube Heaters. The materials selected for use
can withstand the mechanical, chemical, and thermal
stresses which they will be subject to during foreseen
normal use when installed in accordance with the
manufacturers recommendations.
4